Cleaning The Dvd Drive; Cleaning The Diskette Drive; Cleaning The Sensors And The Reflecting Surfaces - Xerox DocuPrint 100 Operator's Manual

Enterprise printing system
Hide thumbs Also See for DocuPrint 100:
Table of Contents

Advertisement

Cleaning the DVD drive

Cleaning the diskette drive

Cleaning the sensors and the reflecting surfaces

Operator Guide
NOTE: Replace the foam pad on the cleaning cartridge after
it has been used three times. The cleaning cartridge itself can
be used approximately 100 times.
Follow the DVD cleaning directions and recommended cleaning
frequency.
1. If there is a DVD disk in the drive, remove it.
2. Follow the directions to clean the DVD drive.
The floppy disk drive must be cleaned at recommended intervals
to prevent read and write errors.
To clean the diskette drive:
1. If there is a diskette in the floppy disk drive, remove it.
2. Insert the cleaning diskette into the disk drive.
3. Follow the directions on the cleaning diskette to clean the
diskette drive.
4. Remove the cleaning diskette.
The following is a list of sensors to clean:
Q850 sensor
Q1011 sensor and mirror
Q1106 sensor
Q1166 sensor
Q1107 sensor
Q1164 sensor
Maintaining the system
4-19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docuprint 115Docuprint 155Docuprint 135Docuprint 180

Table of Contents