Network Configuration - Ricoh Priport HQ9000 Network Manual

Network Configuration

Any change you make with User Tools remains in effect even if the main power
switch or operation switch is turned off, or if the {Clear Modes} key is pressed.
Configuring the network using the control panel
Note
❒ Operations for System Settings are different from normal operations. After
using User Tools, press the {User Tools} key to exit.
❒ If the key operator code has been set, the key operator code entry screen ap-
pears. Enter the code, and then press the [OK] key. For details about the key
operator code, see Operating Instructions.
A
Press the {User Tools} key.
B
Press [System Settings].
C
Press [Interface Settings].
D
Select the setting you want to change, and then press [OK].
E
Change the setting, and then press [OK].
Note
❒ To cancel changes made to settings and return to the System Settings
menu, press [Cancel].
F
Press [Exit].
G
Press the {User Tools} key.
Note
❒ You can also exit by pressing [Exit] on the User Tools main menu.
AJK135S
User Tools Menu (System Settings)
3
9