Figure 61: Wds Example - Access Point A Wds-Ap Vap Setting; Figure 62: Wds Example - Access Point A Vap Ssid And Mac - SMC Networks E21011 User Manual

Figure 61: WDS Example — Access Point A WDS-AP VAP Setting
Click the Save Config button to retain the configuration set up when the
6.
AP is restarted.
A P B C
CCESS OINT ONFIGURATION
Go to the Wireless>VAP Settings page and click Edit to configure VAP 0.
1.
In the VAP Basic Setting, select WDS-STA for the Mode.
2.
Enter the SSID and MAC address of VAP 0 on Access point A. The SSIDs
3.
and MAC addresses of VAP interfaces are displayed on the
Information>AP Status page (see
page 107).
Figure 62: WDS Example — Access Point A VAP SSID and MAC
For security on the WDS link, select WPA-PSK or WPA2-PSK, then
4.
configure the same encryption type and security key as in the Access
Point A configuration.
– 243 –
| WDS Setup Examples
A B
PPENDIX
Basic WDS Link Between Two APs
"AP Wireless Configuration" on