System Clock Commands; Table 12: System Clock Commands - SMC Networks E21011 User Manual

15
sntp-server ip
S C
YSTEM LOCK
These commands are used to configure SNTP and system clock settings on
the access point.

Table 12: System Clock Commands

Command
sntp-server ip
sntp-server enabled
sntp-server date-time
sntp-server daylight-saving
sntp-server timezone
show sntp
This command sets the IP address of the servers to which SNTP time
requests are issued. Use the this command with no arguments to clear all
time servers from the current list.
S
YNTAX
sntp-server ip <1 | 2> <ip>
1 - First time server.
2 - Second time server.
ip - IP address of an time server (NTP or SNTP).
D S
EFAULT ETTING
129.6.15.28
132.163.4.101
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
When SNTP client mode is enabled using the sntp-server enabled
command, the sntp-server ip command specifies the time servers from
which the access point polls for time updates. The access point will poll the
time servers in the order specified until a response is received.
– 141 –
C
OMMANDS
Function
Specifies one or more time servers
Accepts time from the specified time servers
Manually sets the system date and time
Sets the start and end dates for daylight
savings time
Sets the time zone for the access point's
internal clock
Shows current SNTP configuration settings
Mode Page
GC 141
GC 142
GC 142
GC 143
GC 144
Exec 144