SMC Networks E21011 User Manual page 168

| RADIUS Client Commands
C 19
HAPTER
radius-server
accounting port
radius-server
accounting key
This setting has not been effective !
If want to take effect, please execute make-radius-effective command !
AP(config)#
This command sets the RADIUS Accounting port.
S
YNTAX
radius-server accounting port <port>
port - The port used by the RADIUS Accounting server.
(Range: 1024~65535)
D S
EFAULT ETTING
1813
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
When the RADIUS Accounting server UDP port is specified, a RADIUS
accounting session is automatically started for each user that is
successfully authenticated to the access point.
E
XAMPLE
AP(config)# radius-server accounting port 1882
This setting has not been effective !
If want to take effect, please execute make-radius-effective command !
AP(config)#
This command sets the RADIUS Accounting key.
S
YNTAX
radius-server accounting key <key>
key - The RADIUS Accounting server keyphrase.
D S
EFAULT ETTING
DEFAULT
C M
OMMAND ODE
Global Configuration
– 168 –