SMC Networks E21011 User Manual page 128

| System Management Commands
C 13
HAPTER
apmgmtui http
session-timeout
apmgmtui https port
This command sets the web browser timeout limit.
S
YNTAX
apmgmtui http session-timeout <seconds>
seconds - The web session timeout. (Range: 0-1800 seconds, 0
means disabled)
D S
EFAULT ETTING
1800 seconds
C M
OMMAND ODE
Global Configuration
E
XAMPLE
AP(config)# apmgmtui http session-timeout 0
AP(config)#
R C
ELATED OMMANDS
apmgmtui http server
Use this command to specify the UDP port number used for HTTPS/SSL
connection to the access point's web interface. Use the no form to restore
the default port.
S
YNTAX
apmgmtui https port <port_number>
no apmgmtui https port
port_number – The UDP port used for HTTPS/SSL.
(Range: 443, 1024-65535)
D S
EFAULT ETTING
443
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
You cannot configure the HTTP and HTTPS servers to use the same
◆
port.
To avoid using common reserved TCP port numbers below 1024, the
◆
configurable range is restricted to 443 and between 1024 and 65535.
If you change the HTTPS port number, clients attempting to connect to
◆
the HTTPS server must specify the port number in the URL, in this
format: https://device:port_number
– 128 –