| Wireless Interface Commands
C
26
HAPTER
assoc-timeout-
interval
auth-timeout-
interval
C
U
OMMAND
SAGE
When closed system is enabled, the access point will not include its SSID in
beacon messages. Nor will it respond to probe requests from clients that
do not include a fixed SSID.
E
XAMPLE
AP(if-wireless g: VAP[0])#closed-system
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless g)#
This command configures the idle time interval (when no frames are sent)
after which the client is disassociated from the VAP interface.
S
YNTAX
assoc-timeout-interval <minutes>
minutes - The number of minutes of inactivity before disassociation.
(Range: 5-60 minutes)
D
S
EFAULT
ETTING
5 minutes
C
M
OMMAND
ODE
Interface Configuration (Wireless-VAP)
E
XAMPLE
AP(if-wireless 0: VAP[0])# assoc-timeout-interval 10
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless 0: VAP[0])#
This command configures the time interval within which clients must
complete authentication to the VAP interface.
S
YNTAX
auth-timeout-interval <minutes>
minutes - The number of minutes before re-authentication.
(Range: 3-60 minutes)
D
S
EFAULT
ETTING
3 minutes
– 210 –