SMC Networks E21011 User Manual page 142

| System Clock Commands
C 15
HAPTER
sntp-server enabled
sntp-server date-
time
E
XAMPLE
AP(config)#sntp-server ip 1 10.1.0.19
AP#
R C
ELATED OMMANDS
sntp-server enabled
show sntp
This command enables SNTP client requests for time synchronization with
NTP or SNTP time servers specified by the sntp-server ip command. Use
the no form to disable SNTP client requests.
S
YNTAX
[no] sntp-server enabled
D S
EFAULT ETTING
Enabled
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
The time acquired from time servers is used to record accurate dates and
times for log events. Without SNTP, the access point only records the time
starting from the factory default set at the last bootup (i.e., 00:14:00,
January 1, 1970).
E
XAMPLE
AP(config)#sntp-server enabled
AP(config)#
R C
ELATED OMMANDS
sntp-server ip
show sntp
This command sets the system clock.
S
YNTAX
sntp-server <year> <month> <day> <hour> <minute>
year - Sets the year. (Range: 1970-2100)
month - Sets the month. (Range: 1-12)
day - Sets the day. (Range: 1-31)
hour - Sets the hour. (Range: 0-23)
– 142 –