SMC Networks E21011 User Manual page 120

| General Commands
C 12
HAPTER
ping
C M
OMMAND ODE
Exec
E
XAMPLE
The following example disables the CLI timeout.
AP(config)# cli-session-timeout disable
AP(config)#
This command sends ICMP echo request packets to another node on the
network.
S
YNTAX
ping <host_name | ip_address>
host_name - Alias of the host.
ip_address - IP address of the host.
D S
EFAULT ETTING
None
C M
OMMAND ODE
Exec
C U
OMMAND SAGE
◆ Use the ping command to see if another site on the network can be
reached.
The following are some results of the ping command:
◆
Normal response - The normal response occurs in one to ten
■
seconds, depending on network traffic.
Destination does not respond - If the host does not respond, a
■
"timeout" appears in ten seconds.
Destination unreachable - The gateway for this destination indicates
■
that the destination is unreachable.
Network or host unreachable - The gateway found no corresponding
■
entry in the route table.
E
XAMPLE
AP#ping 192.168.1.19
192.168.1.19 is alive
AP#
– 120 –