SMC Networks E21011 User Manual page 149

This command defines the community access string for the Simple Network
snmp-server
Management Protocol. Use the no form to remove the specified community
community
string.
S
YNTAX
snmp-server community string [ro | rw]
no snmp-server community string
D
EFAULT
public - Read-only access. Authorized management stations are only
◆
able to retrieve MIB objects.
private - Read/write access. Authorized management stations are able
◆
to both retrieve and modify MIB objects.
C
OMMAND
Global Configuration
C
OMMAND
If you enter a community string without the ro or rw option, the default is
read only.
E
XAMPLE
AP(config)#snmp-server community alpha rw
AP(config)#
This command sets the system contact string. Use the no form to remove
snmp-server
the system contact information.
contact
S
YNTAX
snmp-server contact string
no snmp-server contact
D
EFAULT
None
string - Community string that acts like a password and permits
access to the SNMP protocol. (Maximum length: 23 characters, case
sensitive)
ro - Specifies read-only access. Authorized management stations
are only able to retrieve MIB objects.
rw - Specifies read/write access. Authorized management stations
are able to both retrieve and modify MIB objects.
S
ETTING
M
ODE
U
SAGE
string - String that describes the system contact.
(Maximum length: 255 characters)
S
ETTING
– 149 –
| SNMP Commands
C 17
HAPTER