SMC Networks E21011 User Manual page 220

| Wireless Security Commands
C 27
HAPTER
wpa-pre-shared-key
E
XAMPLE
AP(if-wireless 0: VAP[0])# cipher-suite tkip
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless 0: VAP[0])#
This command defines a Wi-Fi Protected Access (WPA/WPA2) Pre-shared-
key.
S
YNTAX
wpa-pre-shared-key <hex | passphrase-key> <value>
hex - Specifies hexadecimal digits as the key input format.
passphrase-key - Specifies an ASCII pass-phrase string as the
key input format.
value - The key string. For ASCII input, specify a string between 8
and 63 characters. For HEX input, specify exactly 64 digits.
C M
OMMAND ODE
Interface Configuration (Wireless-VAP)
C U
OMMAND SAGE
To support WPA or WPA2 for client authentication, use the auth
◆
command to specify the authentication type, and use the wpa-
preshared-key command to specify one static key.
If WPA or WPA2 is used with pre-shared-key mode, all wireless clients
◆
must be configured with the same pre-shared key to communicate with
the access point's VAP interface.
E
XAMPLE
AP(if-wireless 0: VAP[0])# wpa-pre-shared-key passphrase-key agoodsecret
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless 0: VAP[0])#
R C
ELATED OMMANDS
auth
– 220 –