Maintenance Settings; Upgrading Firmware - SMC Networks E21011 User Manual

9
U F
PGRADING IRMWARE
M
AINTENANCE
Maintenance settings includes the following sections:
"Upgrading Firmware" on page 100
◆
"Running Configuration" on page 103
◆
◆ "Resetting the Access Point" on page 104
You can upgrade new access point software from a local file on the
management workstation, or from an FTP or TFTP server. New software
may be provided periodically from your distributor.
After upgrading new software, you must reboot the access point to
implement the new code. Until a reboot occurs, the access point will
continue to run the software it was using before the upgrade started. Also
note that new software that is incompatible with the current configuration
automatically restores the access point to the factory default settings when
first activated after a reboot.
– 100 –
S
ETTINGS