SMC Networks E21011 User Manual page 143

D
EFAULT
00:14:00, January 1, 1970
C
OMMAND
Global Configuration
E
XAMPLE
This example sets the system clock to 12:10 April 27, 2009.
AP(config)# sntp-server date-time 2009 4 27 12 10
AP(config)#
R
ELATED
sntp-server enabled
This command sets the start and end dates for daylight savings time. Use
sntp-server
the no form to disable daylight savings time.
daylight-saving
S
YNTAX
sntp-server daylight-saving [date-week <start-month> <start-
week> <start-day> <end-month> <end-week> <end-day>]
no sntp-server daylight-saving
D
EFAULT
Disabled
C
OMMAND
Global Configuration
C
OMMAND
The command sets the system clock back one hour during the specified
◆
period.
◆ Using the command without setting the start and end date enables the
daylight-saving feature.
minute - Sets the minute. (Range: 0-59)
S
ETTING
M
ODE
C
OMMANDS
date-week - The key word to set the date on which to start and
end the daylight-saving time.
start-month - Sets the start month. (Range: 1-12)
start-week - Sets the start week. (Range: 1-5)
start-day - Sets the start day. (Range: 0-6, where 0 is Sunday)
end-month - Sets the end month. (Range: 1-12)
end-week - Sets the end week. (Range: 1-5)
end-day - Sets the end day. (Range: 0-6, where 0 is Sunday)
S
ETTING
M
ODE
U
SAGE
– 143 –
| System Clock Commands
C 15
HAPTER