SMC Networks E21011 User Manual page 217

E
XAMPLE
AP(if-wireless 0: VAP[0])# encryption
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless 0: VAP[0])#
R C
ELATED OMMANDS
key
This command sets the keys used for WEP encryption. Use the no form to
key
delete a configured key.
S
YNTAX
key {<index> <size> <type> <value> | static | dynamic}
no key <index>
index - Key index. (Range: 1-4)
size - Key size. (Options: 64 or 128 bits)
type - Input format. (Options: ASCII, HEX)
value - The key string.
For 64-bit keys, use 5 alphanumeric characters or 10
hexadecimal digits.
For 128-bit keys, use 13 alphanumeric characters or 26
hexadecimal digits.
static - Uses static WEP keys with 802.1X authentication.
dynamic - When using 802.1X authentication, allows WEP keys to
be dynamically generated by the RADIUS server.
D S
EFAULT ETTING
None
C M
OMMAND ODE
Interface Configuration (Wireless-VAP)
C U
OMMAND SAGE
To enable WEP, use the auth shared-key command to select the
◆
"shared key" authentication type, use the key command to configure at
least one key, and then use the transmit-key command to select a key
to use.
If WEP is enabled, all wireless clients must be configured with the same
◆
shared keys to communicate with the VAP.
The WEP key index, length and type configured for the VAP must match
◆
those configured for clients.
C 27
HAPTER
– 217 –
| Wireless Security Commands