SMC Networks E21011 User Manual page 198

| Ethernet Interface Commands
C 25
HAPTER
shutdown
show interface
ethernet
E
XAMPLE
AP(config)#interface ethernet
Enter Ethernet configuration commands, one per line.
AP(if-ethernet)#ip dhcp
AP(if-ethernet)#
R C
ELATED OMMANDS
ip address
This command disables the Ethernet interface. To restart a disabled
interface, use the no form.
S
YNTAX
[no] shutdown
D S
EFAULT ETTING
Interface enabled
C M
OMMAND ODE
Interface Configuration (Ethernet)
C U
OMMAND SAGE
This command allows you to disable the Ethernet port due to abnormal
behavior (e.g., excessive collisions), and reenable it after the problem has
been resolved. You may also want to disable the Ethernet port for security
reasons.
E
XAMPLE
The following example disables the Ethernet port.
AP(if-ethernet)#shutdown
AP(if-ethernet)#
This command displays the status for the Ethernet interface.
S
YNTAX
show ethernet interface
D S
EFAULT ETTING
Ethernet interface
C M
OMMAND ODE
Exec
– 198 –