Figure 17: Quick Start - Step 2 - SMC Networks E21011 User Manual

| Initial Configuration
C 4
HAPTER
Quick Start
S 2
TEP
Old Password — If the unit has been configured with a password
◆
already, enter that password, otherwise enter the default password
"smcdamin."
New Password — The password for management access.
◆
(Length: 5-32 characters, case sensitive)
Confirm New Password — Enter the password again for verification.
◆
C C
OUNTRY ODE
Country Code — Configures the access point's country code from a
◆
drop down menu, which identifies the country of operation and sets the
authorized radio channels.
You must set the country code to the country of operation.
C :
AUTION
Setting the country code restricts operation of the access point to the radio
channels and transmit power levels permitted for wireless networks in the
specified country.
Cancel — Cancels the newly entered settings and restores the orignals.
◆
Next — Proceeds to the next page.
◆
The Step 2 page of the Quick Start configures IP settings and DHCP client
status.

Figure 17: Quick Start - Step 2

– 46 –