| System Management Commands
C
13
HAPTER
prompt
system name
D
S
EFAULT
ETTING
US - for units sold in the United States
99 (no country set) - for units sold in other countries
C
M
OMMAND
ODE
Exec
C
U
OMMAND
SAGE
If you purchased an access point outside of the United States, the
◆
country code must be set before radio functions are enabled.
◆
The available Country Code settings can be displayed by using the
country ? command.
E
XAMPLE
AP#country tw
AP#
This command customizes the CLI prompt. Use the no form to restore the
default prompt.
S
YNTAX
prompt <string>
no prompt
string - Any alphanumeric string to use for the CLI prompt.
(Maximum length: 32 characters)
D
S
EFAULT
ETTING
Enterprise AP
C
M
OMMAND
ODE
Global Configuration
E
XAMPLE
AP(config)#prompt RD2
RD2(config)#
This command specifies or modifies the system name for this device.
S
YNTAX
system name <name>
name - The name of this host.
(Maximum length: 32 characters)
– 124 –