SMC Networks E21011 User Manual page 144

| System Clock Commands
C 15
HAPTER
sntp-server
timezone
show sntp
E
XAMPLE
This sets daylight savings time to be used from the Sunday in the fourth
week of April, to the Sunday in the fourth week of October.
AP(config)# sntp-server daylight-saving date-week 4 4 0 10 4 0
AP(config)#
This command sets the time zone for the access point's internal clock.
S
YNTAX
sntp-server timezone <hours>
hours - Number of hours before/after UTC.
(Range: -12 to +12 hours)
D S
EFAULT ETTING
+08 hours (Hong Kong, Perth, Singapore, Taipei)
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
This command sets the local time zone relative to the Coordinated
Universal Time (UTC, formerly Greenwich Mean Time or GMT), based on
the earth's prime meridian, zero degrees longitude. To display a time
corresponding to your local time, you must indicate the number of hours
and minutes your time zone is east (before) or west (after) of UTC.
E
XAMPLE
AP(config)#sntp-server timezone +8
AP(config)#
This command displays the current time and configuration settings for the
SNTP client.
C M
OMMAND ODE
Exec
E
XAMPLE
AP#show sntp
SNTP Information
===========================================================
Service State : ENABLED
SNTP (server 1) IP : 129.6.15.28
SNTP (server 2) IP : 132.163.4.101
Current Time : Mon Apr 27 13:39:23 UTC 2009
– 144 –