The Application Patrol Edit Screen - ZyXEL Communications ZyWALL USG 50 User Manual

Click Configuration > App Patrol > Common to open the following screen.
Figure 279 Configuration > App Patrol > Common
The following table describes the labels in this screen. See
455 for more information as well.
Table 131 Configuration > App Patrol > Common
LABEL
Edit
Activate
Inactivate
#
Status
Service
Default Access
Apply
Reset

28.3.1 The Application Patrol Edit Screen

Use this screen to edit the settings for an application. To access this screen, go to
the application patrol Common, Instant Messenger, Peer to Peer, VoIP, or
ZyWALL USG 50 User's Guide
DESCRIPTION
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry's settings.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
This field is a sequential value, and it is not associated with a specific
application.
The activate (light bulb) icon is lit when the entry is active and dimmed
when the entry is inactive.
This field displays the name of the application.
This field displays what the ZyWALL does with packets for this
application. Choices are: forward, drop, and reject.
Click Apply to save your changes back to the ZyWALL.
Click Reset to return the screen to its last-saved settings.
Chapter 28 Application Patrol
Section 28.3.1 on page
455