Port Grouping; Port Grouping Overview; Port Grouping Screen - ZyXEL Communications USG-300 - V2.20 ED 2 Manual

Unified security gateway
Table of Contents

Advertisement

13.2 Port Grouping

This section introduces port groups and then explains the screen for port groups.

13.2.1 Port Grouping Overview

Use port grouping to create port groups and to assign physical ports and port
groups to Ethernet interfaces.
Each physical port is assigned to one Ethernet interface. In port grouping, the
Ethernet interfaces are called representative interfaces. If you assign more
than one physical port to a representative interface, you create a port group.
Port groups have the following characteristics:
• There is a layer-2 Ethernet switch between physical ports in the port group. This
provides wire-speed throughput but no security.
• It can increase the bandwidth between the port group and other interfaces.

13.2.2 Port Grouping Screen

Define the relationship between physical ports, port groups, and Ethernet
interfaces in the Port Grouping screen. To access this screen, click
Configuration > Network > Interface > Port Grouping.
Figure 267 Configuration > Network > Interface > Port Grouping
ZyWALL USG 300 User's Guide
Chapter 13 Interfaces
299

Advertisement

Table of Contents
loading

This manual is also suitable for:

Usg 300

Table of Contents