Configuring Cnm; Figure 248 Advanced > Remote Mgmt > Cnm; Table 125 Advanced > Remote Mgmt > Cnm - ZyXEL Communications ZYWALL 2 PLUS User Manual

Internet security appliance

Hide thumbs Also See for ZYWALL 2 PLUS:

Table of Contents

Chapter 21 Remote Management

21.17 Configuring CNM

Vantage CNM is disabled on the device by default. Click ADVANCED > REMOTE MGMT

> CNM to configure your device's Vantage CNM settings.

Figure 248 ADVANCED > REMOTE MGMT > CNM

The following table describes the labels in this screen.

Table 125 ADVANCED > REMOTE MGMT > CNM

Registration

Registration Status

Last Registration Time This field displays the last date (year-month-date) and time (hours-minutes-

Vantage CNM Setup

This read only field displays Not Registered when Enable is not selected.

It displays Registering when the ZyWALL first connects with the Vantage

CNM server and then Registered after it has been successfully registered

with the Vantage CNM server. It will continue to display Registering until it

successfully registers with the Vantage CNM server. It will not be able to

The Vantage CNM server is down.

The Vantage CNM server IP address is incorrect.

The Vantage CNM server is behind a NAT router or firewall that does not

forward packets through to the Vantage CNM server.

The encryption algorithms and/or encryption keys do not match between the

ZyWALL and the Vantage CNM server.

seconds) that the ZyWALL registered with the Vantage CNM server. It

displays all zeroes if it has not yet registered with the Vantage CNM server.

Click Refresh to update the registration status and last registration time.

Select this check box to allow Vantage CNM to manage your ZyWALL.

ZyWALL 2 Plus User's Guide