Tcp/Ip Setup; Ip Address; Figure 307 Menu 5: Dmz Setup; Figure 308 Menu 5.2: Tcp/Ip And Dhcp Ethernet Setup - ZyXEL Communications ZYWALL 2 PLUS User Manual

Chapter 31 DMZ Setup

31.3 TCP/IP Setup

For more detailed information about RIP setup, IP multicast and IP alias, please refer to
Chapter 6 on page

31.3.1 IP Address

From the main menu, enter 5 to open Menu 5 - DMZ Setup to configure TCP/IP (RFC 1155).

Figure 307 Menu 5: DMZ Setup

From menu 5, select the submenu option 2. TCP/IP and DHCP Setup and press [ENTER].
The screen now displays Menu 5.2 -

Figure 308 Menu 5.2: TCP/IP and DHCP Ethernet Setup

DHCP= None
Client IP Pool:
Starting Address= N/A
Size of Client IP Pool= N/A
Primary DNS Server= N/A
IP Address= N/A
Secondary DNS Server= N/A
IP Address= N/A
Third DNS Server= N/A
IP Address= N/A
DHCP Server Address= N/A
The DHCP and TCP/IP setup fields are the same as the ones in Menu 3.2 - TCP/IP and
DHCP Ethernet Setup. Each public server will need a unique IP address. Refer to
29.4 on page 470
480
123.
Menu 5 - DMZ Setup
1. DMZ Port Filter Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number:
TCP/IP and DHCP Ethernet Setup,
Menu 5.2 - TCP/IP and DHCP Ethernet Setup
Press ENTER to Confirm or ESC to Cancel:
for information on how to configure these fields.
TCP/IP Setup:
IP Address= 10.2.3.4
IP Subnet Mask= 255.0.0.0
RIP Direction= Both
Version= RIP-1
Multicast= None
Edit IP Alias= No
ZyWALL 2 Plus User's Guide
as shown next.
Section