Table 20 REGISTRATION
LABEL
Apply
Reset
If the ZyWALL is registered already, this screen is read-only and indicates
whether trial services are activated. Use the Service screen to update your
service subscription status.
Figure 79 REGISTRATION: Registered Device
5.3 Service
After you activate a trial, you can also use the Service screen to register and enter your iCard's
PIN number (license key). Click REGISTRATION > Service to open the screen as shown
next.
If you restore the ZyWALL to the default configuration file or upload a different
configuration file after you register, click the Service License Refresh button to
update license information.
ZyWALL 2 Plus User's Guide
DESCRIPTION
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Chapter 5 Registration
119