Figure 169 Security > Vpn > Vpn Rules (Ike) > Edit Network Policy > Port Forwarding; Table 67 Security > Vpn > Vpn Rules (Ike) > Edit Network Policy > Port Forwarding - ZyXEL Communications ZYWALL 2 PLUS User Manual

Chapter 14 IPSec VPN
Figure 169 SECURITY > VPN > VPN Rules (IKE) > Edit Network Policy > Port Forwarding
The following table describes the labels in this screen.
Table 67 SECURITY > VPN > VPN Rules (IKE) > Edit Network Policy > Port Forwarding
LABEL
Default Server
#
Active
Name
Start Port
End Port
Server IP Address
Apply
Reset
Cancel
260
DESCRIPTION
In addition to the servers for specified services, NAT supports a default server.
A default server receives packets from ports that are not specified in this
screen. If you do not assign a default server IP address, all packets received for
ports not specified in this screen are discarded.
Number of an individual port forwarding server entry.
Select this check box to activate the port forwarding server entry.
Enter a descriptive name for identifying purposes.
Type a port number in this field.
To forward only one port, type the port number again in the End Port field.
To forward a series of ports, type the start port number here and the end port
number in the End Port field.
Type a port number in this field.
To forward only one port, type the port number in the Start Port field above and
then type it again in this field.
To forward a series of ports, type the last port number in a series that begins
with the port number in the Start Port field above.
Type your server IP address in this field.
Click this button to save these settings.
Click this button to begin configuring this screen afresh.
Click this button to return to the VPN-Network Policy -Edit screen without
saving your changes.
ZyWALL 2 Plus User's Guide