Table 59 SECURITY > CONTENT FILTER > Categories (continued)
LABEL
Content Filter Service
Status
Apply
Reset
12.5 Content Filter Customization
Click SECURITY > CONTENT FILTER > Customization to display the CONTENT
FILTER Customization screen.
You can create a list of good (allowed) web site addresses and a list of bad (blocked) web site
addresses. You can also block web sites based on whether the web site's address contains a
keyword. Use this screen to add or remove specific sites or keywords from the filter list.
ZyWALL 2 Plus User's Guide
DESCRIPTION
This read-only field displays the status of your category-based content
filtering (using an external database) service subscription.
License Inactive displays if you have not registered and activated the
category-based content filtering service.
License Active and the subscription expiration date display if you have
registered the ZyWALL and activated the category-based content filtering
service.
Trial Active and the trial subscription expiration date display if you have
registered the ZyWALL and activated the category-based content filtering
service.
License Inactive and the date your subscription expired display if your
subscription to the category-based content filtering service has expired.
Note: After you register for content filtering, you need
to wait up to five minutes for content filtering to
be activated. See
how to check the content filtering activation.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Chapter 12 Content Filtering Screens
Section 13.1 on page 227
for
221