Call Control Support; Budget Management; Figure 397 Call Control; Figure 398 Budget Management - ZyXEL Communications ZYWALL 2 PLUS User Manual

Table 214 Valid Commands
COMMAND
ipsec
bridge
bm
certificates

41.2 Call Control Support

The ZyWALL provides two call control functions: budget management and call history.
Please note that this menu is only applicable when Encapsulation is set to PPPoE or PPTP
in menu 4 or menu 11.1.
The budget management function allows you to set a limit on the total outgoing call time of
the ZyWALL within certain times. When the total outgoing call time exceeds the limit, the
current call will be dropped and any future outgoing calls will be blocked.
Call history chronicles preceding incoming and outgoing calls.
To access the call control menu, select option 9 in menu 24 to go to Menu 24.9 - System
Maintenance - Call Control, as shown in the next table.

Figure 397 Call Control

41.2.1 Budget Management

Menu 24.9.1 shows the budget management statistics for outgoing calls. Enter 1 from Menu
24.9 - System Maintenance - Call Control to bring up the following menu.

Figure 398 Budget Management

Remote Node
1.ChangeMe
2.Dial
ZyWALL 2 Plus User's Guide
DESCRIPTION
These commands display IPSec information and configure IPSec settings.
These commands display bridge information.
These commands configure bandwidth management settings and display bandwidth
management information.
These commands display certificate information and configure certificate settings.
Menu 24.9 - System Maintenance - Call Control
1.Budget Management
2.Call History
Enter Menu Selection Number:
Menu 24.9.1 - Budget Management
Connection Time/Total Budget
No Budget
No Budget
Reset Node (0 to update screen):
Chapter 41 System Maintenance Menus 8 to 10
Elapsed Time/Total Period
No Budget
No Budget
565