Chapter 25 Maintenance
Figure 278 Reset Warning Message
You can also press the hardware RESET button to reset the factory defaults of your
ZyWALL. Refer to
25.12 Restart Screen
System restart allows you to reboot the ZyWALL without turning the power off.
Click MAINTENANCE > Restart. Click Restart to have the ZyWALL reboot. Restart is
different to reset; (see
configuration.
Figure 279 MAINTENANCE > Restart
442
Section 2.3 on page 51
for more information on the RESET button.
Section 25.11.3 on page
441) reset returns the device to its default
ZyWALL 2 Plus User's Guide