Table 196 Sua Address Mapping Rules - ZyXEL Communications ZYWALL 2 PLUS User Manual

Internet security appliance

Hide thumbs Also See for ZYWALL 2 PLUS:

Table of Contents

Table 196 SUA Address Mapping Rules

Local Start IP

Local End IP

Global Start

Global End IP This is the ending global IP address (IGA).

Once you have finished configuring a rule in this menu, press [ENTER] at the message "Press ENTER

to Confirm..." to save your configuration, or press [ESC] to cancel.

35.2.1.2 User-Defined Address Mapping Sets

Now look at option 1 in menu 15.1. Enter 1 to bring up this menu. Look at the differences

from the previous menu. Note the extra Action and Select Rule fields mean you can configure

rules in this screen. Note also that the [?] in the Set Name field means that this is a required

field and you must enter a name for the set.

The entire set will be deleted if you leave the Set Name field blank and press

[ENTER] at the bottom of the screen.

ZyWALL 2 Plus User's Guide

This is the name of the set you selected in menu 15.1 or enter the name of a new set

you want to create.

This is the index or rule number.

Local Start IP is the starting local IP address (ILA).

Local End IP is the ending local IP address (ILA). If the rule is for all local IPs, then the

start IP is 0.0.0.0 and the end IP is 255.255.255.255.

This is the starting global IP address (IGA). If you have a dynamic IP, enter 0.0.0.0 as

the Global Start IP.

These are the mapping types discussed above. Server allows us to specify multiple

servers of different types behind NAT to this machine. See later for some examples.

Chapter 35 Network Address Translation (NAT)