Snmp Traps; Table 206 Snmp Traps - ZyXEL Communications ZYWALL 2 PLUS User Manual

Chapter 38 SNMP Configuration
Table 205 SNMP Configuration Menu Fields (continued)
FIELD
Destination
When you have completed this menu, press [ENTER] at the prompt "Press [ENTER] to confirm or
[ESC] to cancel" to save your configuration or press [ESC] to cancel and go back to the previous
screen.

38.2 SNMP Traps

The ZyWALL will send traps to the SNMP manager when any one of the following events
occurs:

Table 206 SNMP Traps

TRAP #
0
1
4
6
6a
6b
536
DESCRIPTION
Type the IP address of the station to send your SNMP traps to.
TRAP NAME
coldStart (defined in RFC-1215)
warmStart (defined in RFC-1215) A trap is sent after booting (software reboot).
authenticationFailure (defined in
RFC-1215)
whyReboot (defined in ZYXEL-
MIB)
For intentional reboot:
For fatal error:
DESCRIPTION
A trap is sent after booting (power on).
A trap is sent to the manager when receiving any
SNMP get or set requirements with the wrong
community (password).
A trap is sent with the reason of restart before rebooting
when the system is going to restart (warm start).
A trap is sent with the message "System reboot by
user!" if reboot is done intentionally, (for example,
download new files, CI command "sys reboot", etc.).
A trap is sent with the message of the fatal code if the
system reboots because of fatal errors.
ZyWALL 2 Plus User's Guide