Table 186 Menu 4: Internet Access Setup (Ethernet) - ZyXEL Communications ZYWALL 2 PLUS User Manual

Chapter 30 Internet Access
The following table describes the fields in this menu.

Table 186 Menu 4: Internet Access Setup (Ethernet)

FIELD
ISP's Name
Encapsulation
Service Type
Note: DSL users must choose the Standard option only. The My Login, My
Password and Login Server fields are not applicable in this case.
My Login
My Password
Retype to
Confirm
Login Server
Relogin Every
(min)
IP Address
Assignment
IP Address
IP Subnet Mask
Gateway IP
Address
Network
Address
Translation
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.
476
DESCRIPTION
This is the descriptive name of your ISP for identification purposes.
Press [SPACE BAR] and then press [ENTER] to choose Ethernet. The
encapsulation method influences your choices for the IP Address field.
Press [SPACE BAR] and then [ENTER] to select Standard, RR-Toshiba
(RoadRunner Toshiba authentication method), RR-Manager (RoadRunner Manager
authentication method), RR-Telstra or Telia Login. Choose a RoadRunner flavor if
your ISP is Time Warner's RoadRunner; otherwise choose Standard.
Enter the login name given to you by your ISP.
Type your password again for confirmation.
Enter your password again to make sure that you have entered is correctly.
The ZyWALL will find the RoadRunner Server IP if this field is left blank. If it does
not, then you must enter the authentication server IP address.
This field is available when you select Telia Login in the Service Type field.
The Telia server logs the ZyWALL out if the ZyWALL does not log in periodically.
Type the number of minutes from 1 to 59 (30 recommended) for the ZyWALL to wait
between logins.
If your ISP did not assign you a fixed IP address, press [SPACE BAR] and then
[ENTER] to select Dynamic, otherwise select Static and enter the IP address and
subnet mask in the following fields.
Enter the (fixed) IP address assigned to you by your ISP (static IP address
assignment is selected in the previous field).
Enter the subnet mask associated with your static IP.
Enter the gateway IP address associated with your static IP.
Network Address Translation (NAT) allows the translation of an Internet protocol
address used within one network (for example a private IP address used in a local
network) to a different IP address known within another network (for example a
public IP address used on the Internet).
Choose None to disable NAT.
Choose SUA Only if you have a single public IP address. SUA (Single User
Account) is a subset of NAT that supports two types of mapping: Many-to-One and
Server.
Choose Full Feature if you have multiple public IP addresses. Full Feature
mapping types include: One-to-One, Many-to-One (SUA/PAT), Many-to-Many
Overload, Many- One-to-One and Server. When you select Full Feature you must
configure at least one address mapping set!
Please see Chapter 17 on page 309
Address Translation feature.
for a more detailed discussion on the Network
ZyWALL 2 Plus User's Guide