6.8 LAN Static DHCP
This table allows you to assign IP addresses on the LAN to specific individual computers
based on their MAC addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
To change your ZyWALL's static DHCP settings, click NETWORK > LAN > Static DHCP.
The screen appears as shown.
Figure 83 NETWORK > LAN > Static DHCP
ZyWALL 2 Plus User's Guide
Chapter 6 LAN Screens
129