Command Syntax; Command Usage; Figure 396 Valid Commands; Table 214 Valid Commands - ZyXEL Communications ZYWALL 2 PLUS User Manual

Chapter 41 System Maintenance Menus 8 to 10

41.1.1 Command Syntax

The command keywords are in courier new font.
Enter the command keywords exactly as shown, do not abbreviate.
The required fields in a command are enclosed in angle brackets <>.
The optional fields in a command are enclosed in square brackets [].
The |symbol means "or".
For example,
sys filter netbios config <type> <on|off>
means that you must specify the type of netbios filter and whether to turn it on or off.

41.1.2 Command Usage

A list of commands can be found by typing help or ? at the command prompt. Always type
the full command. Type exit to return to the SMT main menu when finished.

Figure 396 Valid Commands

Copyright (c) 1994 - 2007 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys
ip
certificates
ras>
Copyright (c) 1994 - 2007 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys
ip
certificates
ras>
The following table describes some commands in this screen.

Table 214 Valid Commands

COMMAND
sys
exit
device
ether
aux
ip
564
exit
ipsec
exit
ipsec
DESCRIPTION
The system commands display device information and configure device settings.
This command returns you to the SMT main menu.
The device commands deal with the dial backup connection.
These commands display Ethernet information and configure Ethernet settings.
These commands display dial backup information and control dial backup connections.
These commands display IP information and configure IP settings.
ether aux
bridge bm
ether aux
bridge bm
ZyWALL 2 Plus User's Guide