Advanced Wan Setup; Figure 291 Menu 2: Dial Backup Setup; Table 177 Menu 2: Dial Backup Setup - ZyXEL Communications ZYWALL 2 PLUS User Manual

Figure 291
The following table describes the fields in this menu.

Table 177 Menu 2: Dial Backup Setup

FIELD
Dial-Backup:
Active
Port Speed
AT Command
String:
Init
Edit Advanced
Setup
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.

28.5 Advanced WAN Setup

Consult the manual of your WAN device connected to your Dial Backup port for
specific AT commands.
ZyWALL 2 Plus User's Guide
Menu 2: Dial Backup Setup
Menu 2 - WAN Setup
MAC Address:
Assigned By= Factory default
IP Address= N/A
Dial-Backup:
Active= No
Port Speed= 115200
AT Command String:
Init= at&fs0=0
Edit Advanced Setup= No
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Use this field to turn the dial-backup feature on (Yes) or off (No).
Press [SPACE BAR] and then press [ENTER] to select the speed of the connection
between the Dial Backup port and the external device.
Available speeds are:
9600, 19200, 38400, 57600, 115200 or 230400 bps.
Enter the AT command string to initialize the WAN device. Consult the manual of your
WAN device connected to your Dial Backup port for specific AT commands.
To edit the advanced setup for the Dial Backup port, move the cursor to this field;
press the [SPACE BAR] to select Yes and then press [ENTER] to go to Menu 2.1 -
Advanced Setup.
Chapter 28 WAN and Dial Backup Setup
461