Syslog Logging; Figure 370 Menu 24.3: System Maintenance: Log And Trace; Figure 371 Examples Of Error And Information Messages; Figure 372 Menu 24.3.2: System Maintenance: Syslog Logging - ZyXEL Communications ZYWALL 2 PLUS User Manual

3 Select the first option from Menu 24.3 - System Maintenance - Log and Trace to
display the error log in the system.
After the ZyWALL finishes displaying, you will have the option to clear the error log.

Figure 370 Menu 24.3: System Maintenance: Log and Trace

Examples of typical error and information messages are presented in the following figure.

Figure 371 Examples of Error and Information Messages

52 Thu Jul
53 Thu Jul
54 Thu Jul
55 Thu Jul
57 Thu Jul
58 Thu Jul
59 Thu Jul
60 Thu Jul
61 Thu Jul
62 Thu Jul
63 Thu Jul
Clear Error Log (y/n):

39.4.2 Syslog Logging

The ZyWALL uses the syslog facility to log the CDR (Call Detail Record) and system
messages to a syslog server. Syslog and accounting can be configured in Menu 24.3.2 -
System Maintenance - Syslog Logging, as shown next.

Figure 372 Menu 24.3.2: System Maintenance: Syslog Logging

ZyWALL 2 Plus User's Guide
Menu 24.3 - System Maintenance - Log and Trace
1. View Error Log
2. UNIX Syslog
4. Call-Triggering Packet
Please enter selection
1 05:54:53 2004 PP05
1 05:54:53 2004 PINI
1 05:54:56 2004 PP05 -WARN
1 05:54:56 2004 PP0d
1 05:54:56 2004 PP0d
1 05:54:56 2004 PINI
1 05:54:56 2004 PINI
1 05:55:26 2004 PSSV -WARN
1 05:56:56 2004 PINI
1 07:50:58 2004 PINI
1 07:53:28 2004 PINI
Menu 24.3.2 - System Maintenance - Syslog Logging
Syslog:
Active= No
Syslog Server IP Address= 0.0.0.0
Log Facility= Local 1
Press ENTER to Confirm or ESC to Cancel:
Chapter 39 System Information & Diagnosis
ERROR Wireless LAN init fail, code=15
INFO Channel 0 ok
SNMP TRAP 3: interface 3: link up
INFO LAN promiscuous mode <0>
INFO LAN promiscuous mode <1>
INFO Last errorlog repeat 1 Times
INFO main: init completed
SNMP TRAP 0: cold start
INFO SMT Session Begin
INFO SMT Session End
INFO SMT Session Begin
541