Configuring A Filter Set; Figure 351 Menu 21: Filter And Firewall Setup; Figure 352 Menu 21.1: Filter Set Configuration - ZyXEL Communications ZYWALL 2 PLUS User Manual

Chapter 37 Filter Configuration

37.2 Configuring a Filter Set

The ZyWALL includes filtering for NetBIOS over TCP/IP packets by default. To configure
another filter set, follow the procedure below.
1 Enter 21 in the main menu to open menu 21.

Figure 351 Menu 21: Filter and Firewall Setup

2 Enter 1 to bring up the following menu.

Figure 352 Menu 21.1: Filter Set Configuration

Filter
Set #
------
1
2
3
4
5
6
3 Select the filter set you wish to configure (1-12) and press [ENTER]
4 Enter a descriptive name or comment in the Edit Comments field and press [ENTER].
5 Press [ENTER] at the message [Press ENTER to confirm] to open Menu 21.1.1 -
Filter Rules Summary.
522
Menu 21 - Filter and Firewall Setup
1. Filter Setup
2. Firewall Setup
Enter Menu Selection Number:
Menu 21.1 - Filter Set Configuration
Comments
-----------------
_______________
_______________
_______________
_______________
_______________
_______________
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel:
Filter
Set # Comments
------ -----------------
7 _______________
8 _______________
9 _______________
10 _______________
11 _______________
12 _______________
.
ZyWALL 2 Plus User's Guide