Entering The Password; Navigating The Smt Interface; Figure 280 Initial Screen; Figure 281 Password Screen - ZyXEL Communications ZYWALL 2 PLUS User Manual

Chapter 26 Introducing the SMT

Figure 280 Initial Screen

26.2.2 Entering the Password

The login screen appears after you press [ENTER], prompting you to enter the password, as
shown below.
For your first login, enter the default password "1234". As you type the password, the screen
displays an "X" for each character you type.
Please note that if there is no activity for longer than five minutes after you log in, your
ZyWALL will automatically log you out and display a blank screen. If you see a blank screen,
press [ENTER] to bring up the login screen again.

Figure 281 Password Screen

26.3 Navigating the SMT Interface

The SMT is an interface that you use to configure your ZyWALL.
Several operations that you should be familiar with before you attempt to modify the
configuration are listed in the table below.

Table 168 Main Menu Commands

OPERATION KEYSTROKES
Move down
to another
menu
Move up to a
previous
menu
Move to a
"hidden"
menu
446
Copyright (c) 1994 - 2007 ZyXEL Communications Corp.
initialize ch =0, ethernet address: 00:A0:C5:01:23:45
initialize ch =1, ethernet address: 00:A0:C5:01:23:46
initialize ch =2, ethernet address: 00:A0:C5:01:23:47
initialize ch =3, ethernet address: 00:A0:C5:01:23:48
initialize ch =4, ethernet address: 00:00:00:00:00:00
AUX port init . done
Modem init . inactive
Press ENTER to continue...
Enter Password : XXXX
DESCRIPTION
[ENTER] To move forward to a submenu, type in the number of the desired
submenu and press [ENTER].
[ESC] Press the [ESC] key to move back to the previous menu.
Press [SPACE Fields beginning with "Edit" lead to hidden menus and have a
BAR] to change default setting of No. Press [SPACE BAR] to change No to Yes,
No to Yes then and then press [ENTER] to go to a "hidden" menu.
press [ENTER].
ZyWALL 2 Plus User's Guide