Table of Contents
Advertisement
Chapter 22 CNM System Setting
Table 169 CNM System Setting > Configuration > VRPT Management (continued)
LABEL
Compatible
Status
Used/Max
Add
Renew
Edit
Remove
22.6.1 Add/Edit VRPT Management
Use this screen to configure a VRPT server. To open this screen, click Add or Edit in the
CNM System Setting > Configuration > VRPT Management screen.
Figure 206 CNM System Setting > Configuration > VRPT Management > Add/Edit
The following table describes the labels in this screen.
Table 170 CNM System Setting > Configuration > VRPT Management > Add/Edit
LABEL
Name
Syslog Server Address
Description
338
DESCRIPTION
This field indicates if the connected device is compatible with Vantage
CNM.
This field displays the status of the Vantage Report instance. The bulb
lights on when the Vantage CNM is able to connect to the Vantage
Report server. Otherwise, the bulb is off.
Click this to look at the number of registered devices in the VRPT
server and the maximum registered device number this VRPT server
allows to add in.
Click this to set up a new Vantage Report instance in Vantage CNM.
Click this to get the latest connection status between the Vantage
Report instance and the Vantage CNM.
Click this to edit an existing Vantage Report instance in Vantage CNM.
Click this to remove one Vantage Report instance.
DESCRIPTION
Enter a descriptive name of the Vantage Report instance in Vantage
CNM. You must use 3-28 alphanumeric characters, underscores (_),
dashes (-), or periods (.).
Enter the IP address of the Vantage Report server.
Type a description, if desired, for the Vantage Report instance. You
can use up to 255 printable ASCII characters.
Vantage CNM User's Guide
Advertisement
Table of Contents
Troubleshooting
