Radio Report - ZyXEL Communications VANTAGE CNM - V3.1 User Manual

Chapter 16 3G Monitor

16.3 Radio Report

Use this screen to view the 3G connection signal strength and quality of a Vantage CNM-
managed device.
Click Monitor > 3G Monitor > Radio Report. When viewing the records for all devices, the
following screen displays.
Figure 170 Monitor > 3G Monitor > Radio Report (Folder list)
The following table describes the labels in this screen.
Table 141 Monitor > 3G Monitor > Radio Report (Folder list)
LABEL
Current Time
Page Size
Device Name
Signal Quality
Signal Strength
Statistics
Runtime Monitor
Total Records
290
DESCRIPTION
This shows the date and time of viewing. The date is in Year:Month:Day
format. The time is in XXhr(s) YYmin(s) ZZsec(s) format.
Select how many records you want to see in each page.
This is the name of the device where the 3G card is installed.
This is the signal quality of the 3G card if it is up. This is represented by a
bar graph in ascending height order. Depending on how many bars are lit
green, the 3G connection can be:
• No signal - All bars are grayed out.
• Very weak - The smallest bar in the left is lit green.
• Weak - The two bars in the left are lit green.
• Medium - Three bars from the left are lit green.
• Strong - Four bars from the left are lit green.
• Very strong - All bars are lit green.
This is N/A if the device is offline.
This is the signal strength of the 3G connection. The unit of measurement
used is dBm (Decibels per milliwatt).
This is N/A if the device is offline.
Click the "Show Statistics" icon to view a bar graph showing the 3G signal
quality statistics.
Refer to Section Figure 171 on page 291
Click the "Runtime Monitor" icon to view a line graph showing the 3G signal
strength report.
Refer to Section Figure 172 on page 292
This shows how many records there are in all.
to view the diagram.
to view the diagram.
Vantage CNM User's Guide