ZyXEL Communications VANTAGE CNM - V3.1 User Manual page 50

Chapter 2 GUI Introduction
Table 10 Navigation Panel Links (continued)
LINK
Device Status
3G Monitor
Device HA Status This link takes you to a screen where you can monitor device high availability (HA)
Device Alarm
Log & Report
Operation Report This link takes you to a screen where you can see firmware upgrade, device
CNM Logs
VRPT
CNM System Setting
Configuration
Maintenance
Device Owner
Upgrade
License
About
Account Management
Group
Account
This section provides some notes about the navigation panel.
• The configuration information appears when you click a menu item from navigation panel
for a selected device, folder or for Vantage CNM management.
• Menus display may vary depending on which device model you are configuring.
• If the login user does not have permission to use a menu item, it is not displayed.
• The operation on Vantage CNM is:
If you select Device Operation, Log & Report (all except sub-menu VRPT) or
Monitor in the menu bar,
click a device or a folder,
1
50
DESCRIPTION
This link takes you to a screen where you can monitor device general information
(ex. firmware version, WAN IP address, LAN MAC address, and so on) and current
status.
This link takes you to a screen where you can view information about the 3G (Third
Generation) card(s) installed as LAN backup(s) on Vantage CNM's monitored
device(s).
status for ZLD devices (ex. ZyWALL1050 or ZyWALL USG 300).
This link takes you to a screen where you can monitor device alarms.
cofniguration, configuration backup/restore, and signature profile backup/restore
reports.
This link takes you to a screen where you can see all or specified CNM logs via a
query.
This function is available if any Vantage Report (VRPT) server is configured on the
selected device. This link takes you to a screen where you can see reports
generated by an associated VRPT server.
This link takes you to a screen where you can configure Vantage CNM settings.
This link takes you to a screen where you can backup/restore Vantage CNM
settings and device list.
This link takes you to a screen where you can manage device owners.
This link takes you to a screen where you can see current Vantage CNM software
version and perform a software upgrade.
This link takes you to a screen where you can activate or upgrade a Vantage CNM
license.
This link takes you to a screen where you can see Vantage CNM software version,
release date, and copyright.
This link takes you to a screen where you can define group privilege and manage
(add/edit/remove) groups.
This link takes you to a screen where you can manage (add/edit/kick out/remove)
user accounts.
Vantage CNM User's Guide