Figure 41 Device Operation > Device Configuration > Network > WAN > Dial Backup
(ZyNOS ZyWALL)
The following table describes the labels in this screen.
Table 26 Device Operation > Device Configuration > Network > WAN > Dial Backup (ZyNOS
ZyWALL)
LABEL
Enable Dial Backup
Basic Settings
User Name
Password
Retype to confirm
Password
Authentication Type
Dial Backup Port
Speed
Vantage CNM User's Guide
DESCRIPTION
Select this check box to turn on dial backup.
Type the user name assigned by your ISP.
Type the password assigned by your ISP.
Type your password again to make sure that you have entered it correctly.
Use the drop-down list box to select an authentication protocol for outgoing
calls. Options are:
CHAP/PAP - The device accepts either CHAP or PAP when requested by
this remote node.
CHAP - The device accepts CHAP only.
PAP - The device accept PAP only.
Use the drop-down list box to select the speed of the connection between the
Dial Backup port and the external device. Available speeds are: 9600, 19200,
38400, 57600, 115200 or 230400 bps.
Chapter 5 Device Network Settings
95