ZyXEL Communications VANTAGE CNM - V3.1 User Manual page 292

Chapter 16 3G Monitor
When viewing the signal strength and quality report for a particular device, click Monitor >
3G Monitor > Radio Report. The following screen displays.
Figure 172 Monitor > 3G Monitor > Radio Report (Single Device)
The following table describes the labels in this screen.
Table 143 Monitor > 3G Monitor > Radio Report (Single Device)
LABEL
3G Signal Strength Report
Device Name
Period
Next Refresh Time
graph
292
DESCRIPTION
This is the name of the device where the 3G card is installed.
Select the time period of the device's record of 3G connection signal
strength and quality you want to view. Choose between Last 1 Hr or Last
24 Hrs.
This shows the time until the next refresh happens or when the diagram will
show the newest data. This is in XXhr(s) YYmin(s) ZZsec(s) format.
The graph displays the report information visually. Move your mouse over a
point in the graph to display its identification.
It shows the signal strength of the 3G connection in a line graph. The unit of
measurement used is dBm (Decibels per milliwatt). The graph's time
coverage can span one hour or one day, depending on the time range you
choose.
Vantage CNM User's Guide