Chapter 18 Device Alarm
Table 152 Monitor > Device Alarm > Responded Alarm (continued)
STATE
Category
Severity
Time Period
Responder
Retrieve
Page Size
#
Category
Severity
Time
Message
Source
Destination
Responder
Response Time
Clear
Total Records
Clear All
Export
306
DESCRIPTION
Select the type of alarm you wish to view.
Select the severity of alarm you wish to view.
Select the time period for which you wish to view alarms.
Select alarms based on the administrator who is supposed to respond to them.
Click this to update the list of alarms based on the specified criteria.
Select how many records you want to see in each page.
This is the number of an individual entry.
This field displays the type of alarm.
This field displays the alarm severity.
This field displays the time the alarm occurred.
This field displays the reason the alarm occurred.
This field lists the source IP address and the port number of the incoming packet.
This field lists the destination IP address and the port number of the incoming
packet.
This field displays the administrator who responded to the alarm.
This field displays the time the alarm occurred.
Click this to remove the alarm from the monitor. See
This entry displays the total number of records on the current page of the list.
Click this to remove all of the alarms in the list from the monitor. See
18.1.3 on page
305.
Click this to export the current information in this screen to an AlarmStore.csv file.
Section 18.1.3 on page
305.
Section
Vantage CNM User's Guide