Show Detail - ZyXEL Communications VANTAGE CNM - V3.1 User Manual

Table 134 Monitor > 3G Monitor > Summary
LABEL
3G Total Tx
3G Total Rx
Card Model
View
Total Records

16.1.1 Show Detail

Use this screen to see further details about the 3G card(s) installed on Vantage CNM-managed
device(s).
Click the Show Detail icon in Monitor > 3G Monitor > Summary. The resulting screen
varies depending on how you configured your
and other factors stated below.
16.1.1.1 3G connection is down, Budget Control is enabled
The 3G connection is down and you enabled budget control in the Device Configuration >
Network > WAN > 3G(WAN 2) screen (see
screen displays as follows.
Figure 156 Monitor > 3G Monitor > Show Details (3G down, Budget Control enabled)
Vantage CNM User's Guide
DESCRIPTION
This shows the total outgoing traffic bytes of the 3G connection. This value
is cumulative from the day the device is registered to Vantage CNM.
This shows the total incoming traffic bytes of the 3G connection. This value
is cumulative from the day the device is registered to Vantage CNM.
This shows the 3G card model.
It shows Not Installed if the 3G card is not installed.
Click the "Show Detail" icon to view other information about the 3G card.
Refer to Section 16.1.1 on page 279
This shows how many records there are in all.
Vantage CNM
Section 5.3.3 on page
Chapter 16 3G Monitor
for the Show Detail screen.
, the condition of the 3G card
89). The Show Detail
279