16.6.3 Monitor Interval
Use this screen to specify the time interval that the Vantage CNM accounts before updating its
reports.
Click Monitor > 3G Monitor > Monitor Setting > Monitor Interval. The following screen
displays.
Figure 178 Monitor > 3G Monitor > Monitor Setting > Monitor Interval
The following table describes the labels in this screen.
Table 148 Monitor > 3G Monitor > Monitor Setting > Monitor Interval
LABEL
Monitor Interval
Apply
Reset
Vantage CNM User's Guide
DESCRIPTION
Specify the time interval when the Vantage CNM checks for conditions. You
can enter 0 if you want to disable this feature.
Enter a value from ten to sixty seconds.
Click this to save your settings.
Click this to change the settings in this screen to the last-saved values.
Chapter 16 3G Monitor
299