ZyXEL Communications VANTAGE CNM - V3.1 User Manual page 260

Chapter 12 VPN Community
The following table describes the fields in this screen.
Table 124 VPN Management > VPN Community > Add/Edit
FIELD
VPN Community
Community Name
Description
Community Type
Nail Up
Allow NetBIOS Traffic
Through IPSec Tunnel
Enable inter-routing
between spokes
Member Gateways
Hub Gateway
Spoke Gateways
Central Gateway
Satellite Gateways
#
Device Name
My IP/Domain
Local Network
Add
Edit
Total Records
Phase 1
Pre-Shared Key
Negotiation Mode
260
DESCRIPTION
Type a name to identify this VPN community.
Type a descriptive note for the VPN community.
Select a VPN community type such as Full Mesh, Hub & Spoke, or Remote
Access.
Select this check box to turn on the nailed up feature for this VPN community.
Select this check box to allow NetBIOS packets sent through the VPN
connection.
This option is available if you select the Hub & Spoke community type.
Select this to allow routing among spoke devices.
This is avaialble if you select the Full Mesh.community type. You have to
select at least two device in this section.
This is avaialble if you select the Hub & Spoke community type. You have to
select only one device in this section.
This is avaialble if you select the Hub & Spoke community type. You have to
select at least one device in this section.
This is avaialble if you select the Remote Access community type. You have
to select only one device in this section.
This is avaialble if you select the Remote Access community type. You have
to select at least one device in this section.
This is the number of an individual entry.
This field displays the device name.
This field identifies the WAN IP address or domain name of the member
gateway.
Note: When you select Remote Access for the community
type, make sure the central gateway's MyIP is a fixed IP
address.
This is the network behind the member gateway. A network policy specifies
which devices (behind the IPSec routers) can use the VPN tunnel.
Click this to open the screen where you can select VPN gateways in this
community.
Click this to edit the selected VPN gateway in this community.
This entry displays the total number of records on the current page of the list.
Select Auto-generate the Vantage CNM generates a pre-shared key. Or
select User-defined and type a key from 8 to 31 case-sensitive ASCII
characters or from 16 to 62 hexadecimal ("0-9", "A-F") characters. You must
precede a hexadecimal key with a "0x (zero x), which is not counted as part of
the 16 to 62 character range for the key. For example, in
"0x0123456789ABCDEF", 0x denotes that the key is hexadecimal and
0123456789ABCDEF is the key itself.
Select Main or Aggressive from the drop-down list box.
Vantage CNM User's Guide