ZyXEL Communications VANTAGE CNM - V3.1 User Manual page 92

Chapter 5 Device Network Settings
The following table describes the labels in this screen.
Table 25 Device Configuration > WAN > 3G(WAN2)
LABEL
WAN2 Setup
Enable
3G Card
Configuration
3G Wireless Card
Network Type
Network
Selection
ISP Parameters for Internet Access
Access Point
Name (APN)
Initial String
(containing APN)
Authentication
Type
User Name
Password
Retype to
Confirm
92
DESCRIPTION
Select this option to enable WAN 2.
The fields below display only when you enable WAN 2.
This displays the manufacturer and model name of your 3G card if you inserted
one in the selected device. Otherwise, it displays Not Installed.
Select the type of the network (UMTS/HSDPA only, GPRS/EDGE only, GSM all
or WCDMA all) to which you want the card to connect. See
for more information. Otherwise, select Automatically to have the card connect to
an available network using the default settings on the 3G card.
The types of the network vary depending on the 3G card you inserted.
This setting is saved to the flash of your 3G card.
Select a service provider to which you want the card to connect. Otherwise, select
Automatically to have the selected device use the default settings on the 3G card
and connect to your service provider's base station.
This shows Automatically only by default. Click Scan to have the selected device
search for and display the available service providers.
This field resets to the default setting (Automatically) if the selected device
restarts.
Select this option and enter the APN (Access Point Name) if your ISP gives you the
APN only. Connections with different APNs may provide different services (such as
Internet access or MMS (Multi-Media Messaging Service)) and charge methods.
You can enter up to 31 ASCII printable characters. Spaces are allowed.
This field is available only when you insert a GSM 3G card.
Select this option and enter the initial string and APN if you know how to configure
or your ISP provides a string, which would include the APN, to initialize the 3G
card.
You can enter up to 72 ASCII printable characters. Spaces are allowed.
This field is available only when you insert a GSM 3G card.
The selected device supports PAP (Password Authentication Protocol) and CHAP
(Challenge Handshake Authentication Protocol). CHAP is more secure than PAP;
however, PAP is readily available on more platforms.
Use the drop-down list box to select an authentication protocol for outgoing calls.
Options are:
CHAP/PAP - The selected device accepts either CHAP or PAP when requested by
the ISP.
CHAP - The selected device accepts CHAP only.
PAP - The selected device accepts PAP only.
None - The selected device does not send your user name and password for
authentication. The user name and password fields are grayed out. Select this
option if your ISP did not give you a user name and password.
Type the user name (of up to 31 ASCII printable characters) given to you by your
service provider.
Type the password (of up to 31 ASCII printable characters) associated with the
user name above.
Type your password again to make sure that you have entered is correctly.
Table 24 on page 90
Vantage CNM User's Guide