Show Detailed Vpn Community - ZyXEL Communications VANTAGE CNM - V3.1 User Manual

Chapter 14 VPN Monitor
Table 127 VPN Management > VPN Monitor > By Community (continued)
LABEL
Community Type
Up Tunnels
Total Tunnels
Show Detail
Total Records

14.1.1 Show Detailed VPN Community

Use this screen to monitor VPN tunnel status. To open this screen, click Show Detail in the
VPN Management > VPN Monitor > By Community screen.
Figure 146 VPN Management > VPN Monitor > By Community > Show Detail
The following table describes the fields in this screen.
Table 128 VPN Management > VPN Monitor > By Community > Show Detail
LABEL
Community Name
Page Size
#
Local Gateway
Remote Gateway
Status
Down/Up Time
266
DESCRIPTION
This displays an VPN community type such as Full Mesh, Hub & Spoke, or
Remote Access.
This displays how many tunnels has been successfully established.
This displays how many tunnels in total are configured in this VPN
community.
Click this to display a screen where you can view detailed VPN settings
among the devices.
This entry displays the total number of records on the current page of the list.
DESCRIPTION
This field displays the name of the VPN community.
Select how many records you want to see in each page.
This is the number of an individual entry.
This field displays the local gateway name and IP address of this tunnel.
This field displays the remote gateway name and IP address of this tunnel.
This field displays the VPN tunnel is on (connected icon) or off (disconnected
icon). * display means it is a dynamic tunnel rule. N/A means the tunnel has
not installed yet.
This displays the time duration the tunnel has been up or down. * display
means it is a dynamic tunnel rule. N/A means the tunnel has not installed yet.
Vantage CNM User's Guide