ZyXEL Communications VANTAGE CNM - V3.1 User Manual page 74

Chapter 5 Device Network Settings
Figure 32 Device Operation > Device Configuration > Network > WAN > WAN1 (ZyNOS
ZyWALL with one WAN port)
5.3.1.1 Ethernet Encapsulation
The following table describes the labels in the Ethernet encapsulation screen.
Table 18 Device Operation > Device Configuration > Network > WAN > ISP (Ethernet) –
ZyNOS ZyWALL (one WAN port)
LABEL
Encapsulation
Service Type
WAN:IP
WAN IP Address
Assignment
My WAN IP
Address
My WAN IP Subnet
Mask
Gateway IP
Address
74
DESCRIPTION
You must choose the Ethernet option when the WAN port is used as a regular
Ethernet.
Choose from Standard, Telstra (RoadRunner Telstra authentication method),
RR-Manager (Roadrunner Manager authentication method), RR-Toshiba
(Roadrunner Toshiba authentication method) or Telia Login.
The following fields do not appear with the Standard service type.
Select Get automatically from ISP If your ISP did not assign you a fixed IP
address. This is the default selection.
Select Use fixed IP address If the ISP assigned a fixed IP address.
Enter your WAN IP address in this field if you selected Use Fixed IP Address.
Enter the IP subnet mask (if your ISP gave you one) in this field if you selected
Use Fixed IP Address.
Enter the gateway or remote IP address (if your ISP gave you one) in this field if
you selected Use Fixed IP Address.
Vantage CNM User's Guide