Reset To Factory - ZyXEL Communications VANTAGE CNM - V3.1 User Manual

Chapter 9 Device Configuration Management
Figure 118 Device Operation > Configuration Management > Signature Profile Management
> Backup & Restore > Restore (Folder)
The following table describes the fields in this screen
Table 108 Device Operation > Configuration Management > Signature Profile Management
> Backup & Restore > Restore (Folder)
TYPE
#
Device Name
Status
Total Records
Restore
Cancel

9.6.4 Reset to Factory

Use this screen to restore anti-virus or IDP configuration to factory default to a device. You
can track the status and look at the results of this operation in the Operation Report. See
Section 19.6 on page
the menu bar and then click Configuration Management > Signature Profile Management
> Reset to Factory in the navigation panel.
236
DESCRIPTION
This is the number of an individual entry.
This field displays the name of each device that is on in the folder.
This displays the current status of the device. You can only restore the
configuration file of a device that is Ready.
This entry displays the total number of records on the current page of the
device list.
Select the check box next to one or more devices and click this to restore the
specified configuration file and signatures to them.
Click this to return to the previous screen without applying any changes.
319. To open this screen, select the device, click Device Operation in
Vantage CNM User's Guide