Configuring A Filter Set For The Prestige; Figure 156 Menu 21 Filter Set Configuration; Figure 157 Netbios_Wan Filter Rules Summary - ZyXEL Communications P-660H-D Series User Manual

28.2 Configuring a Filter Set for the Prestige

To configure a filter set, follow the steps shown next.
1 Enter 21 in the main menu to display Menu 21 – Filter and Firewall Setup.
2 Enter 1 to display Menu 21.1 – Filter Set Configuration as shown next.

Figure 156 Menu 21 Filter Set Configuration

Filter
Set #
------
1
2
3
4
5
6
3 Type the filter set to configure (no. 1 to 12) and press [ENTER]
4 Type a descriptive name or comment in the Edit Comments field and press [ENTER].
5 Press [ENTER] at the message
Filter Rules Summary (that is, if you selected filter set 1 in menu 21.1).

Figure 157 NetBIOS_WAN Filter Rules Summary

# A Type
- - ---- --------------------------------------------------------------- -
- -
1 Y IP
2 Y IP
3 Y IP
4 Y IP
5 Y IP
6 Y IP
Chapter 28 Filter Configuration
Menu 21.1 - Filter Set Configuration
Comments
-----------------
_______________
_______________
_______________
_______________
_______________
_______________
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel:
Menu 21.1.2 - Filter Rules Summary
Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=137
Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=138
Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=139
Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=137
Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=138
Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=139
Enter Filter Rule Number (1-6) to Configure:
Set #
------ -----------------
7 _______________
8 _______________
9 _______________
10 _______________
11 _______________
12 _______________
Press ENTER to confirm..." to display Menu 21.1.1 –
"
Filter Rules
P-660R/H-D Series User's Guide
Comments
.
M m n
N D N
N D N
N D N
N D N
N D N
N D F
250